start page | rating of books | rating of authors | reviews | copyrights

sendmail

sendmailSearch this book
Previous: 22.4 The Configuration File Chapter 22
Security
Next: 22.6 The Aliases File
 

22.5 Permissions

One technique that attackers use to gain root privilege is to first become a semiprivileged user like bin or sys . Such semiprivileged users often own the directories in which root -owned files live. By way of example, consider the following:

drwxr-sr-x 11 bin      2560 Sep 22 18:18 /etc -rw-r-r-  1 root     8199 Aug 25 07:54 /etc/sendmail.cf

Here, the /etc/sendmail.cf configuration file is correctly writable only by root . But the directory in which that file lives is owned by bin and writable by bin . Having write permission on that directory means that bin can rename and create files. An individual who gains bin permission on this machine can create a bogus sendmail.cf file by issuing only two simple commands:

% 

mv /etc/sendmail.cf /etc/...

 % 

mv /tmp/sendmail.cf /etc/sendmail.cf

The original sendmail.cf is renamed ... (a name that is not likely to be randomly noticed by the real system administrator). The bogus /tmp/sendmail.cf then replaces the original:

drwxr-sr-x 11 bin      2560 Sep 22 18:18 /etc -rw-r-r-  1 bin      4032 Nov 16 00:32 /etc/sendmail.cf

UNIX pays less attention to semiprivileged users than it does root . The user root , for example, is mapped to nobody over NFS, whereas the user bin remains bin . Consequently, the following rules must be observed to prevent malicious access to root -owned files:

22.5.1 Dangerous Write Permissions

The sendmail program, of necessity, needs to trust its configuration file. To aid in the detection of risks, it checks the permissions of its configuration file when first reading that file. If the file is writable by group or world, sendmail logs the following message: [13]

[13] This is done only when not in rule-testing mode to prevent spurious warnings when you already know you are using a weak configuration file with -C .


configfile
: WARNING: dangerous write permissions

If sendmail is being started as a daemon or is being used to initialize the aliases database, it will print the same message to its standard error output.

22.5.2 Permissions for :include:

The sendmail program doesn't always run as root . When delivering mail, it often changes its identity into that of a nonprivileged user. When delivering to a :include: mailing list, for example, it can change its identity to that of the owner of the list. This too can pose security risks if permissions are not appropriate. Consider the following aliases file entry:

newprogs: :include:/usr/local/lists/proglist

Here, notification of new programs are mailed to the alias newprogs . The list of recipients is taken from the following file:

-rw-rw-r-  2 bin  prog   704 Sep 21 14:46 /usr/local/lists/proglist

Because this file is owned by bin , sendmail changes its identity to bin when delivering to the list of recipients. Unfortunately, the file is also writable by the group prog . Anyone in the group prog can add a recipient to that list, including one of the form

|/tmp/x.sh

This tells sendmail to deliver a copy of the message by running the program (a shell script) /tmp/x.sh . The sendmail program (which is still running as bin ) executes that program as bin . Further, suppose the program /tmp/x.sh contains the following:

#!/bin/sh cp /bin/sh /tmp/sh chmod u+s /tmp/sh cat - > /dev/null exit 0

This causes bin first to make a copy of the Bourne shell in /tmp (a copy that will be owned by bin ), then to set the suid bit on that copy (the u+s ):

-rwsr-xr-x  1 bin    64668 Sep 22 07:38 /tmp/sh

The script then throws away the incoming mail message and exits with a zero value to keep sendmail unsuspecting. Through this process, an ordinary user in the group prog has created an suid shell that allows anyone to become the semiprivileged user bin . From the preceding discussion (see Section 22.5, "Permissions" ) you can see the trouble that can cause!

22.5.3 Permissions for ~/.forward Files

The ~/.forward file can pose a security risk to individual users. There is a higher degree of risk if the user is root or one of the semiprivileged users (such as bin ). Because the ~/.forward file is like an individual mailing list ( :include: ) for the user, risk can be encountered if that file is writable by anyone but the user. Consider the following for example:

drwxr-xr-x 50 george guest        3072 Sep 27 09:19 /home/george/ -rw-rw-r-  1 george guest          62 Sep 17 09:49 /home/george/.forward

Here, the user george 's ~/.forward file is writable by the group guest . Anyone in group guest can edit george 's ~/.forward file, possibly placing something like this into it:

\george |"cp /bin/sh /home/george/.x; chmod u+s /home/george/.x"

Now all the attacker has to do is send george mail to create an suid george shell. Then, by executing /home/george/.x , the attacker becomes george .

Some users, such as the pseudo-user uucp , have home directories that must be world-writable for software to work properly. If that software is not needed (if a machine, for example, doesn't run UUCP software), that home directory should be removed. If the directory must exist and must be world-writable, you should create a protected ~/.forward file there before someone else does. The best protection is to create a nonempty directory called ~/.forward , owned by root , and set its permissions to 000:

# 

cd ~uucp

 # 

rm -f .forward

 # 

mkdir .forward

 # 

touch .forward/uucp

 # 

chown root .forward .forward/uucp

 # 

chmod 000 .forward .forward/uucp

 # 

chmod +t ~uucp

 # 

chown root ~uucp

Even though the ~uucp directory is world-writable (so anyone can remove anything from it), no one but root can remove the ~/.forward directory because it is not empty. The mode of 000 protects the file .forward/uucp from being removed. The mode of +t prevents users from renaming files or directories that they do not own. Finally, root is made to own the ~uucp directory so that uucp will be unable to clear the +t bit. Even with this protection, mail for uucp should be routed to a real user with the aliases (5) file.

Note that all critical dot files in a world-writable home directory must be protected from creation by others. Each of .forward , .rhosts , .login , .cshrc , .profile , and .logout should be a nonempty, root -owned directory with mode 000. World-writable home directories must be owned by root instead of by the user, and they must have the +t (sticky bit) set.

When processing a user's ~/.forward file, sendmail requires that the file be owned by the user or by root . If ownership is correct, it then examines the ~/.forward file's permissions. If that file is world-writable, sendmail ignores (and logs) attempts to run programs and to write directly to files. If the UnsafeGroupWrites option (see Section 34.8.73, UnsafeGroupWrites ) is true, sendmail also checks for group write permissions and, if it is found, similarly ignores attempts to run programs and to write to files.

22.5.4 Recommended Permissions

Table 22.1 shows the recommended ownerships and permissions for all the files and directories in the sendmail system. The path components will vary depending on the vendor version of sendmail you are running. For example, where we show the /usr/lib/sendmail directory, your site may use /usr/etc/sendmail , or even /usr/lib/mail/sendmail .

Table 22.1: Recommended Permissions
Path Type Owner Mode
/ Directory root 0755 drwxr-xr-x
/usr Directory root 0755 drwxr-xr-x
/usr/lib [14] Directory root 0755 drwxr-xr-x
/usr/lib/sendmail File root 06511 -r-s--s--x [15]
/etc Directory root 0755 drwxr-xr-x
/etc/sendmail.cf File root 0644 or 0640
OS /etc/sendmail.st File root 0644 -rw-r--r--
OH /etc/sendmail.hf File root 0444 -r--r--r--
OA /etc/aliases File root 0644 -rw-r--r--
/etc/aliases.pag File root 0644 -rw-r--r--
/etc/aliases.dir File root 0644 -rw-r--r--
/etc/aliases.db File root 0644 -rw-r--r--
F /path Directory root 0755 drwxr-xr-x
F /path/file File n/a 0444 or 0644
/var Directory root 0755 drwxr-xr-x
/var/spool Directory root 0755 drwxr-xr-x
OQ /var/spool/mqueue Directory root 0700[16] drwx---
:include: /path Directories root 0755 drwxr-xr-x
:include: /path/list File n/a 0644 -rw-r--r--

[14] The sendmail program sometimes lives in /usr/sbin or in some other directory. If so, adjust this path accordingly.

[15] The sendmail program may need to be sgid kmem for the load average to be checked on some systems.

[16] CERT (the Computing Emergency Response Team) recommends that the mqueue directory be mode 0700 to prevent potential security breaches.


Previous: 22.4 The Configuration File sendmail Next: 22.6 The Aliases File
22.4 The Configuration File Book Index 22.6 The Aliases File